Every summer we see the same thing at the clinic. The weather turns sticky, and suddenly hearing aids that were working perfectly start crackling, cutting out or sounding muffled. Bundaberg’s humidity is hard on hearing aids, even the newest waterproof models.
This is our 2026 update on humidity and hearing aids. It explains why humid air gets into hearing aids when rain doesn’t, what the “IP68” water rating really covers, how today’s devices from Starkey, Oticon and Widex are built to cope, and what you can do at home and in the clinic.
Why humidity gets in when rain doesn’t
Humidity isn’t a different substance from water. It is water, in the form of vapour. The difference is how the molecules behave.
In liquid water, such as rain, sweat or a splash from the tap, the molecules cling together into droplets. In humid air, the same water molecules float around one at a time. A single molecule can slip through tiny gaps and seams that a droplet can’t. As one hearing aid guide puts it, humidity “exists as a vapor, allowing it to pass through barriers that are traditionally water-resistant.”
So a hearing aid can shrug off a shower of rain and still slowly take on moisture from the air around it, day after day.
What the IP68 rating really tests
Most modern hearing aids carry an IP68 rating, the highest available for hearing aids. The “6” means the casing is dust-tight. The “8” means it stays watertight when submerged, which Starkey describes as usually a depth of about one metre for over 30 minutes.
That’s an impressive standard, but it’s a test of liquid water, done with clean water in a laboratory. It doesn’t test months of warm, humid air, salty sweat or the condensation that forms inside a device. That’s why the better manufacturers run their own extra tests for humidity and sweat, which we cover below.
Condensation: how vapour turns back into water inside
Once water vapour is inside a hearing aid, a change in temperature can turn it back into liquid. Walk from a hot Bundaberg afternoon into an air-conditioned shopping centre and the inside of your hearing aid cools quickly. The moisture inside condenses into tiny droplets on the microphones, the receiver (the speaker) and the circuitry.
Older behind-the-ear hearing aids with clear tubing show this clearly. One US audiologist describes the tubing in humid weather as starting to “look a little like a greenhouse.”
Your ear canal adds to the problem. It’s warm and naturally moist, and that’s exactly where the receiver of most modern hearing aids sits. A US clinic study of 48 hearing aid wearers measured the humidity where the receiver sat in the ear. None of the people without receiver problems had readings above 60%. Of those with receiver problems, 78% did.
Sweat makes it worse
Sweat isn’t just water. It contains salt, and salt drives corrosion. A 2023 study from the Technical University of Denmark examined hearing aids that had failed in everyday use in Europe, the United States and Japan. Most of the corrosion failures happened where salt from human sweat was present, affecting parts such as solder joints, battery contacts and microphones.
Behind-the-ear and receiver-in-canal hearing aids sit right against the skin, so on a hot day they’re exposed to sweat for hours at a time.
Bundaberg by the numbers
Bureau of Meteorology long-term averages for Bundaberg put the average 9am humidity at 70% in January, 73% in February and 71% in March. Combine that with summer heat, sweat and air-conditioning, and it’s easy to see why late spring through autumn is our busiest time for moisture problems.
How the 2026 hearing aids handle moisture
The good news is that today’s rechargeable hearing aids are far better sealed than the battery-door models of a few years ago. These are the current devices we fit at AIM Hearing Bundaberg.
Starkey Omega AI: IP68, and tested well beyond it
Starkey’s Omega AI carries an IP68 rating, and Starkey has added a new water-repelling (hydrophobic) coating to the outer shell. Starkey says it tests its rechargeable hearing aids “beyond IP68 ratings,” including “aggressive accelerated aging testing.”
Starkey has published the detail of this kind of testing for its Genesis AI range, and it shows how seriously the company takes moisture:
- Protecting the battery first. Starkey states that “moisture ingress to the battery is the largest concern with rechargeable products,” so it fully encloses the battery compartment.
- A humidity chamber. Hearing aids spend 21 days at 35°C and 95% humidity, which Starkey says simulates about five years of ageing.
- Salt mist. Devices are exposed to a salt spray that simulates sweat, chlorinated water and humid conditions.
- A sweat drip test. Artificial sweat is dripped onto the hearing aids, with Starkey reporting a 100% pass rate.
I’ve been to Starkey’s laboratories in Eden Prairie in the United States and watched this testing done in front of me. The lengths they go to, well beyond what the IP68 standard asks for, are genuinely impressive.
Alan Macgillivray, AIM Hearing Bundaberg
Even so, Starkey itself describes its devices as “waterproof, but not invincible,” and that’s the right way to think about any hearing aid.
Oticon Reveal: IP68
Oticon’s Reveal, which replaces the Oticon Intent, is rated IP68 and uses a sealed lithium-ion rechargeable battery. Independent reviewers report the same moisture and dust protection as the Intent.
Oticon Zeal: IP68
The Zeal is Oticon’s in-ear rechargeable hearing aid, also rated IP68. Because it sits entirely in the ear canal, it lives in that warm, moist environment all day, so a nightly drying routine matters even more. Hearing professionals note that devices sitting completely in the ear, or with the receiver in the canal, are at higher risk from moisture.
Widex Allure: IP68
The Widex Allure is rated IP68 and uses a lithium-ion rechargeable battery, with reviewers praising its build quality.
“Waterproof” doesn’t mean invincible
An IP68 rating means a hearing aid will survive an accident, like getting caught in the rain or dropping it in the sink. It doesn’t mean moisture can never get in. As one US guide puts it, “there is no such thing as a truly waterproof hearing aid.” Please don’t swim or shower in your hearing aids, whatever the box says.
Signs your hearing aids have taken on moisture
- Crackling or static
- Sound that’s weak, muffled or distorted
- Sound that cuts in and out, or stops altogether
- Volume that changes on its own
These symptoms can also be caused by a blocked wax guard, so it’s worth changing the wax guard first. If that doesn’t fix it, moisture is the likely culprit.
Daily habits for humid weather
- Wipe them down every evening with a soft, dry cloth, paying attention to the microphone openings.
- Wipe them dry before they go in the charger. Some manufacturers make this a condition of their water-resistance claims.
- Use a drying box or dehumidifier overnight. If your hearing aids take batteries, open the battery door and take the battery out so the compartment can air out. Our article on keeping your hearing aids dry in Bundy’s summer compares the options.
- Keep them out of the bathroom. Don’t store them on the vanity, and take them out before you shower.
- Clean them after sunscreen, insect repellent or hairspray. These products can damage hearing aids.
- Keep them out of the sun and the car. Heat can shorten battery life and warp the plastic casing.
- Change wax guards regularly. A guard that’s clogged with wax and moisture muffles the sound.
What not to do
- Don’t use a hairdryer or the oven. Extreme heat causes more damage.
- Don’t use rice. There’s little evidence it works, and the starchy dust can get inside the hearing aid.
If your hearing aids get wet
- Take them out straight away. If they use batteries, open the battery door and remove the battery.
- Gently wipe the outside with a soft, dry cloth.
- Put them in a drying box or dehumidifier for at least 24 hours.
- If they still aren’t working properly, bring them in rather than trying a repair yourself.
What we do in the clinic
When home drying isn’t enough, we have two machines built for this job.
- Redux. The Redux creates a vacuum, which lowers the temperature at which water evaporates to around room temperature. Gentle heat, at about body temperature, helps draw the moisture out without stressing the electronics. A built-in humidity sensor measures how much moisture has been removed and keeps going until the chamber reads dry.
- MedRx UltraVac+. The UltraVac+ uses vacuum and reverse airflow to clear wax and debris out of tubing and ports, and it has its own short drying cycle.
If your hearing aids are playing up this summer, bring them in to AIM Hearing Bundaberg. You’re welcome even if your hearing aids were fitted somewhere else. If they need more than a clean and dry, we’ll tell you honestly whether a repair through the manufacturer is the better option.
Thinking about new hearing aids that cope better with Queensland weather? See our hearing aids page or request an appointment.
Sources
- Bureau of Meteorology, Climate statistics for Bundaberg Aero
- Hall, C.M. & Croutch, C. (2010). A field study on the effect of relative humidity on hearing aid receivers. The Hearing Review.
- Yadav, A. & Ambat, R. (2023). A comparative study on corrosion failure analysis of hearing aid components. Materials and Corrosion.
- Starkey, Genesis AI: Crafted for Quality and Reliability (white paper)
- Starkey, IP68 feature summary
- Starkey UK, Waterproof hearing aids
- HearingTracker, Starkey Omega AI review, Oticon Reveal vs Widex Allure and Oticon Zeal comparison
- HearingTracker, How to protect your hearing aids from moisture
- NCOA, Best hearing aids for sweat, rain and humid weather
- Amplifon Australia, Hearing aid maintenance during summer
- The Philadelphia Inquirer, Hot, humid weather and hearing aids
- Redux, Drying technology
- Medical Search Australia, MedRx UltraVac+
